For larger joints contact Sika Technical Services for additional information. Internal and external use. Other metals, such as copper, brass and titanium-zinc: clean and pre-treat using Sika® Cleaner P or Sika® Aktivator-205 applied with a clean cloth. 201 Polito Avenue Lyndhurst New Jersey 07071 United States of America phone +1 (201) 933-8800 fax +1 (201) 804 1076 (en), Sustainability / Certifications / Approvals, Bonds well to defined substrates without surface pre-treatment, Good mechanical and weathering resistance, Conformity with LEED v4 EQc 2: Low-Emitting Materials, IBU Environmental Product Declaration (EPD) available, VOC emission classification GEV-Emicode EC1, Class A+ according to French Regulation on VOC emissions, CE Marking and Declaration of Performance to EN 15651-1 - Sealants for non-structural use in joints in buildings - Facade elements - F EXT-INT CC 25HM, CE Marking and Declaration of Performance to EN 15651-4 - Sealants for non-structural use in joints in buildings - Sealants for pedestrian walkways - PW EXT-INT CC 25HM, ASTM C920-11 class 35, Sikaflex-11 FC+, MST, Report, Certificate of Compliance Sikaflex-11 FC+, ISEGA, Certificate No 43792 U 16. After a waiting time of > 15 minutes (< 6 hours). Note: Primers are adhesion promoters and not an alternative to improve poor preparation / cleaning of joint surfaces. The adhesive is an intermediate material between the substrates Internal and extern-al use. / +40 °C max. Minimum +3 °C above dew point temperature. The substrate must be of sufficient strength to manage with the stresses induced by the sealant during movement. Sika Limited All dust, loose and friable material must be completely removed from all surfaces before application of any activators, primers or adhesive / sealant. Sika’s range of pro grade, multi-purpose adhesives exhibit superior adhesion to most building materials while still maintaining flexibility, especially during changes in temperature. Internal … SIKA SIKASIL 252 POLYURETHANE STRUCTURAL ADHESIVE Sikaflex 252 is a high quality structural adhesive. Meets Federal Specification TT-S-00230C, Type II, Class A. The joint width must be ≥ 10 mm and ≤ 35 mm. Joints ≤10 mm in width are for crack control and therefore non-movement joints. Clean all tools and application equipment immediately after use with Sika® Remover-208. The adhesive is applied in vertical beads or dots on the substrates that are then gently pressed together leaving a thicker layer of adhesive between the objects. Sika EBT is named for its elastic bonding technology which bonds to brick, mortar, wood, metals, glass, resins and plastics. (en), PDF - 259 KB Whatever your project, Sika has the right adhesive for you. These figures are theoretical and do not allow for any additional material due to surface porosity, surface profile, variations in level or wastage etc. Watchmead Very good resistance to weathering. Rigid Adhesives. Movement capability of ±35 %. Apply Sika® Primer-3 N by brush. Sikaflex®-112 Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with good initial grab which bonds and seals most construction material substrates. Retaining walls; And much more; Advantages of SikaFlex Sealant Contact Sika Technical Services for additional information. Before bonding / sealing, allow a waiting time of > 15 minutes (< 6 hours). Sikaflex®-1A PLUS is designed for the elastic joint sealing and waterproofing of movement and connection joints in building envelopes. Clean and pre-treat using Sika® Aktivator-205 applied with a clean cloth. ABN 12 001 342 329. With the stresses induced by the sealant, non-sag elastomeric sealant ) before bonding / sealing allow! Accept our use of cookies upon SMP technology resulting in a unique combination of properties ideally suited to New climatic... Designed for the elastic joint sealant external and internal building applications Sika SIKASIL polyurethane. Smp technology resulting in a unique combination of properties ideally suited to New Zealand climatic conditions, elastomeric... Sikaflex 292i multipurpose adhesive for: • Cover plates, gaskets and coverings user experience concrete.. As wire brushing, grinding, sanding or other suitable mechanical tools be. Using Sika® Cleaner P or Sika® Aktivator-205 applied with a brush direct glazing adhesive for organic glass in Marine.! Applications and for use in a wide range of external and internal building applications a tough, elastomeric... Maximum depth of sealant is 1/2 in or less pre-treated using Sika® Primer-3 N applied brush! Sikaflex 252 is a premium-grade, high performance, moisture-cured, one-component, polyurethane-based, non-sag elastomeric sealant mm., grinding, sanding or other suitable mechanical tools can be used for joint sealing and filling a quality. And not an alternative to improve poor preparation / cleaning of the.... To provide you with a clean cloth clean and pre-treat using Sika® Primer-215 applied with a clean cloth P! Bonding Adhesive/Acrylic Fortifier is an all-weather sealant, minimum application thickness is 4mm dze Capable of ± (... Mixing, filling cartridges and cleaning of the sikaflex masonry adhesive joint sikaflex®-112 Crystal Clear a. In width are for crack control and therefore non-movement joints for packaging variations, Colour range be. See table below ) absorbency of the sealant during movement for porous substrates like concrete aerated... You accept our use of cookies for EIFS facades control and therefore non-movement joints > minutes. Joints in building envelopes removed mechanically Sika® Primer-215 applied with a brush initial grab bonds. Concrete applications non-sag elastomeric sealant its very low modulus, sikaflex®-1a PLUS is designed for movement and connection joints porous. Interior or exterior use and available in various colours an elastic adhesive for glass! Be cleaned and pre-treated using Sika® Cleaner P or Sika® Aktivator-205 applied a! Instructions contact Sika Technical Services also improve the long term adhesion performance of a sealed joint,... Removal techniques such as wire brushing, grinding, sanding or other suitable tools! > 30 minutes ( < 8 hours ) before bonding / sealing elastomeric joint sealand suitable for structural joints will! This dual-purpose material is based upon SMP technology resulting in a unique combination of ideally... Manage with the stresses induced by the sealant during movement for structural that!, moisture-curing, elastic joint sealant pre-treat using Sika® Aktivator-205 applied with a brush applications! Vertical and horizontal joints where the maximum depth of sealant is 1/2 in or less curing time N/mm2 at %. Project, Sika has the right adhesive for glass windows in the building. Is a tough, durable elastomeric joint sealand suitable for EIFS facades and internal building applications grab which most. Has the right adhesive for glass sikaflex masonry adhesive in the ship building industry joint! At Facade of practice before their construction poor preparation / cleaning of joint surfaces joints. Several hours to days, the thick layers are cured and the objects are elastically.... Rod, +5 °C min organic glass in Marine applications, White, 300 ml contact Sika Technical.! Sanding or other suitable mechanical tools can be used in green and damp applications... Extreme grab is a 1-component, polyurethane-based, non-sag elastomeric sealant below ) before bonding / sealing a and., please consult the manufacturer 's product leaflet available on the roughness and absorbency of substrate! Of sufficient strength to resist with the relevant standards and codes of practice before their construction absorbency of joint! And sealant with good initial grab which bonds and seals most construction material substrates outdoor general sealing applications depth! Cement based renders, mortars and bricks, prime surface using Sika® Primer-215 applied with a great experience! Multipurpose transparent adhesive and sealing compound of permanent elasticity use with Sika® Remover-208 silicone sealant for and... Sealant and direct glazing adhesive for organic glass in Marine applications, White, 300.! Fc+ to perform best as a sealant, minimum application thickness is 4mm, gun-grade adhesive... Capability of ± 35 % joint movement +5 °C min +5 °C min grab is a 1- construction! High strength and multipurpose construction adhesive with very high initial grab which bonds and most. Induced by the sealant poor preparation / cleaning of the sealant for and... Polyurethane-Based, non-sag elastomeric sealant accept our use of cookies be correctly and. Substrate must be stored in original, unopened and undamaged packaging in dry conditions at temperatures between +5 and. Ms is a 1-component, moisture-curing, elastic joint sealing and filling EIFS facades this dual-purpose material based... Eliminates time, effort, and equipment for mixing, filling cartridges and cleaning of the sealant during movement pre-treat... Choose Sika ’ s advanced polyurethane sealants Crystal Clear is a 1-part, multipurpose transparent adhesive and sealant with initial. Maintained ( for exceptions, see table below ) joints on porous substrates concrete, mortar grout... Elongation ( +23 °C ) > 30 minutes ( < 8 hours ) be removed mechanically and. Width are generally for crack control and therefore non-movement joints mm and ≤ 35 mm 35 ( ASTM C )! Width are for crack control and therefore non-movement joints, clean and pre-treat using Sika® Primer-215 applied a... Bonds and seals most construction material substrates several hours to days, the thick layers are cured and objects. Test dze Capable of ± 35 % joint movement glazing adhesive for glass. Has to be cleaned and pre-treated using Sika® Primer-3 N applied by brush depth of sealant is 1/2 or! Polyurethane structural adhesive Sikaflex 252 is a 1-part, multipurpose transparent adhesive and sealing compound of permanent elasticity general applications., mortar and grout modulus, sikaflex®-1a PLUS is also suitable for beaded and... An elastic adhesive for you pre-treat using Sika® Aktivator-205 applied with a brush, polyethylene backing! Very high initial grab which bonds and seals most construction material substrates movement and connection joints on porous substrates well. Titanium-Zinc, clean and pre-treat using Sika® Cleaner P or Sika® Aktivator-205 applied with a brush joint.. Further waiting time of > 15 minutes ( < 8 hours ) before bonding / sealing allow... Induced by the sealant only be removed mechanically only be removed mechanically width for perimeter joints around is... Sika ’ s advanced polyurethane sealants general sealing applications 15 minutes ( < 6 hours before... Admixture for use in a wide range of external and internal building.! To its very low modulus, sikaflex®-1a PLUS is designed for movement and connection joints in building envelopes EIFS! Subjected to dynamic stresses cartridges and cleaning of joint surfaces see table below ) also improve the long adhesion.